What we build

Nine things, done properly.

Six shade structure types and three safety products. Every one is designed, fabricated and installed by the same team, and every one is engineered for the Gulf rather than adapted to it.

  • 6 shade systems
  • 3 safety products
  • Design to handover
Aerial view of a cluster of sage green and sand hyperbolic paraboloid shade sails with circular vents, arranged over a resort courtyard beside a tennis court and pool
01

Tensile Shades

Doubly-curved membrane structures engineered as architecture. Every panel is patterned from a form-found model, so the fabric carries its load in tension and holds its shape for its whole service life.

View
A light steel car parking canopy with layered woven shade panels stepping down over a row of parked cars beside a modern office building
02

Car Parking Shades

Cantilever, single-post and back-to-back bays sized to your parking layout. Columns sit on the bay line, never between a car and its door, and every canopy is set to drain away from the aisle.

View
Large charcoal and green shade sails on timber-toned posts covering a desert park playground with slides and climbing structures, mountains on the horizon
03

Play Area Shades

High-tension sails set at alternating heights so the play surface stays covered as the sun moves. Knitted HDPE blocks up to 98% of UV while letting the prevailing wind pass straight through.

View
Fig. — Covered assembly walkway, elevation
04

School Shades

Assembly areas, walkways and drop-off zones covered to keep them usable through the middle of the day. Detailed with no reachable sharp edges and installed to a schedule that works around term time.

View
Two interlocking sand and white hyperbolic shade sails on slim stainless masts covering a dining terrace outside a low modern building
05

Sail Shades

Hyperbolic paraboloid sails on slim masts — the lightest structural footprint available. Opposed curvature keeps the fabric taut, so a sail reads as a drawn line rather than a hung sheet.

View
Fig. — Centre-post umbrella, elevation
06

Umbrella Shades

Cantilever and centre-post umbrellas for terraces, poolsides and forecourts. Freestanding or fixed, they cover a defined area and can be struck for wind without touching the surrounding structure.

View
Fig. — Column corner guard, plan
07

Corner Guard Protector

Impact protection on exposed column and wall returns in car parks, warehouses and loading areas. Absorbs the strike that would otherwise take a chunk out of the structure — and out of the vehicle.

View
Fig. — Hinge-side finger guard, plan
08

Finger Protection Door

Hinge-side and leading-edge guards that close the gap a door creates as it swings. Standard in nurseries, schools and clinics, and retrofittable to doors already hung.

View
Fig. — Post padding, elevation and section
09

Safety Pole Padding

Dense closed-cell padding wrapped to car park columns, play area posts and sports hall uprights. Sized to the post, fixed without fasteners in the impact zone, and cleanable.

View
Sand-coloured shade sails tensioned above a heritage quarter alleyway

Next step

Have a space that needs shade?

Let's design something built for your environment.

Book a site survey
WhatsApp